hello to all friends
Here is a project that I left in stand by of my very first plane to my credit .
I would open this post with the Dauntless 3/4 with that version "late"!
The kit? Good ! He accuses his age now but remains a very good bill for this model at 1/32!
I would not do the boxing review, because having started sub-sets, I do not see how to put the whole thing back on clusters .
the kit is improved with old Eduard references
Here is like even the box .
Otherwise, and as mentioned above, I tackled the subject of PE for the interior, where I made several sub-sets for painting and before putting everything in the office!
Beginnings of the pieces!
the dorsal turret with the change of the two ANM2 7.62 by those of Master!
the two removable panels! So cut in the rough !!
Otherwise, improvements of the two M2 50 caliber for them also by those of Master!
I know: out:! The 3/4 will not be seen anymore, but at the exit, they make a big difference
Beginning of the set-up of the front post part !!
The rest, with the end of the pieces in preparation!
I modified, like the cable that go around the driver with a piece of copper !
So, these are the last pictures des ensembles !
The cable says above!
Otherwise the cockpit !!!
otherwise, the engine