Genessis-Models

Genessis Models Survey

 

 

Genessis-Models
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
falloffalot

Avatar / Picture

Flight Lieutenant
Registered:
Posts: 754
Reply with quote  #1 
Guys been looking on Pinterest for tips and inspiration [smile] and notice quite a few models (planes, cars & trucks) have tyre deformation
A bit like this:

How do you guys produce this effect, with both solid & hollow plastic?

Cheers Jas

__________________
Jas.......... The Scratchbuilder


0
nigel56

Admin
Registered:
Posts: 3,234
Reply with quote  #2 
I tend to show the bulge when I'm doing a vehicle or plane that is exceptionally heavy, like a Hercules.
I have my own rule of thumb, and it works for me. Slice off the bottom of tyre in one piece. The bit you have cut off cut in half. What you have then are 2 pieces that show you how much you must bulge the tyre on each side at the base. This I would do using something like milliput.

Rubber tyre that come with kits tend to do there own bulging, but you can make it even better by increasing the weight of the model.
I tend to weight my tanks down with old AA batteries taped inside the hull. I know we are talking tracks but it can be very useful when the tank is on the back of a transporter like the Dragon which has rubber tyres.

On some models you can get away with just sanding the base of the tyre flat to give the illusion of weight, and not have to do the bulge.

Of course there are so many after-market items , that you can get weighted tyres in resin that have the bulge.

Hope some of this is useful.
0
helldiver

Avatar / Picture

Flight Sergeant
Registered:
Posts: 303
Reply with quote  #3 
I've read also of while heating water, pressing down the wheel/tyre on the vessel can give both the flatness and bulge. Never tried it though!
__________________
Aidan in Tyrone
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.